Pssst — Your tire's calling. Time for a change

Comments Email
Continental A.G. photo

REGENSBURG, Germany (May 8, 2014) — If research being carried out by  Continental A.G. pans out as planned, tires may someday soon be able to tell drivers not only when they need airing up but also when they’re worn out/need replacing or that the car is overloaded.

Drawing on the resources of the company’s wide-ranging vehicle dynamics businesses, forward-thinking researchers at Continental are conducting research into sensors built into tires that can deduce tread depth from gradual changes in tire rolling characteristics and as well as detect a vehicles’ load by measuring tire deflection.

Continental A.G. photo Continental proposes molding sensors into the tire, directly underneath the tread to allow them to monitor the size of the contact area in order to calculate the vehicle load.

“It’s not for nothing that legislators all over the world have defined a minimum tire tread depth for safe driving,” said Andreas Wolf, head of Conti’s Body & Security business unit. “We...will, in future, be able to conveniently read tread depth electronically with the aid of sensors embedded in the tires.”

This new feature could be offered as early as 2017 on new car models equipped with direct tire pressure monitoring systems (TPMS) from Continental, Mr. Wolf said, which Conti calls electronic Tire Information System, or “eTIS.”

This new generation of tire sensors will be fitted directly underneath the tread of the tire, Conti said, where they can infer running characteristics from the variations in tire deformation. On-board software then can analyze the data and determine either the tread depth or vehicle load.

Continental A.G. photo Andreas Wolf, head of Continental A.G.’s Body & Security business unit.

To determine tread depth, the sensors monitor a tire’s rolling characteristics over a longer period of time. The specifics of the tires’ altered rolling characteristics are compared with the accumulated empirical data; if the tread is run down to below a tire-specific threshold value, the on-board electrical system signals that a tire change is due.

Conti stresses that drivers also can monitor their treadwear through the tire-wear indicators that Conti molds into its tires. These small ridges between the tread grooves indicate that the recommended minimum allowable tread depth — 3 millimeters in summer tires, 4 mm for winter tires — have been attained.

Regarding vehicle load, software developed by Continental can calculate load by detecting changes in tire rolling characteristics and inform the driver of the respective axle load. Future driver assistance systems will use the load information to adjust their functions to the respective vehicle weight, Conti said.

Continental has been supplying tire pressure sensors since 2002 under its VDO brand, and more recently it has enhanced its offerings in this area with the development of the “Filling Assistant,” a system integrated at the OE level with the vehicle to help the driver fill his or her tires accurately without the use of a tire gauge.

This feature triggers the car’s horn when the proper inflation pressure has been achieved. Nissan Motor Co. Ltd. has promoted this feature on several of its models.

Starting this November, TPMS will become mandatory for newly registered passenger cars in the European Union.

 

 

 

More Polls>

TB Reader Poll

Previous | Published May 22, 2015

When is the last time you attended one of the national tire industry trade shows, such as SEMA, ITEC or the North American Tire & Retread Expo?

I try and take in at least one show a year.
30%
I usually attend one every few years.
14%
There are so many tire maker and distributor meetings each year, I don’t see a need to attend one of the national shows.
12%
I don’t find value in these shows and haven’t been to one in years.
19%
I’d like to but I am too busy
25%